If you buy through some of the links on our site, we may earn a commission.

Step-by-Step: Installing macOS Compatible Bluetooth USB Dongle

Looking for an easy to install Bluetooth USB dongle for your Mac or Hackintosh PC — I recommend the Broadcom BCM20702 Chipset. It’s readily available used by many dongles, inexpensive and works easily without drivers. But you need to install some software just to enable it.

Here are my step-by-step instructions!

Mac Bluetooth USB Dongle

Tip! Cheap macOS compatible Bluetooth USB dongles here on eBay.

In my case the integrated AirPort Extreme card was broken on the Macbook Pro. This is a combo card with Wi-Fi and Bluetooth combined — (1) Wi-Fi would work for a while and then turn itself off until restart, (2) Bluetooth would keep randomly turning off and back on, making it impossible to use any Bluetooth device. So I decided to get a cheap external adapter instead of paying for expensive replacement work.

Note that I have El Capitan (10.11.6 at the time of writing) but this will most probably work with earlier versions of the macOS.

Bluetooth USB Dongle Broadcom BCM20702

I purchased a Broadcom BCM20702 equipped USB Bluetooth Adapter which went under the brand name “GMYLE” (although received dongle says “Succul”).

I noticed that with a lot of compatible dongles you don’t see Mac compatibility listed. But it’s safe to ignore that, as long as you have a supported chipset in your hands. Mine actually says on the back of the box that it’s Mac OS compatible.

Bluetooth 4.0 USB

Succul

Required Software

First you need to install: Xcode (the OS X developer tools). Then an additional tools package that contains the “Bluetooth Explorer” app, which is needed to activate the “Host Controller”.

(1) First — grab Xcode over here if it’s not already installed. Apple ID is required for both downloads (1) (2).

Xcode 8

(2) Second — go to the “Downloads for Apple Developers” section and search for Xcode. Or use this direct link to get there. Look for the version of the tools package that corresponds to your version of Xcode. Previously the package has been called “Hardware IO Tools” but since Xcode 8 it’s just “Additional Tools”.

Xcode Additional Tools & Hardware IO Tools

Note: “Additional Tools for Xcode 8” supports only macOS Sierra. So if you are on El Capitan or other older version, you might consider sticking with Xcode 7.

Open up Bluetooth Explorer and go to Tools –> HCI Controller Selector.

Bluetooth Explorer Host Controller Selector

You should see the Broadcom Corp chip within the list of host controllers. Pick the right one and “Activate”. And you are done!

macOS Bluetooth

Bluetooth mouse gets immediately connected.

How is this working for macOS 10.13 High Sierra in 2024? Let me know!

Please, also let us know the setup that’s working for you.
Or is the Bluetooth USB dongle not working? Leave your problems below.

Also I’d likely kindly note my readers, that some of these guides and posts on Elftronix are affiliated with other companies and the services they provide. This could potentially result in financial benefit.

Sincere thank you for reading and supporting me! David.

18 thoughts on “Step-by-Step: Installing macOS Compatible Bluetooth USB Dongle”

    • What chipset does your bluetooth device have?
      Do you see it in the list of host controllers?
      Are you getting an error message?

      Thanks.

      Reply
      • Hi ,David. My bluetooth chip is BCM20702 ,the same to you. yes ,i can see it in the list of host controllers. when i press the active button ,nothing happen~~~s

        Reply
        • OK — unfortunately i haven’t verified that this is working with Sierra yet and looks like you followed the instructions correctly. I will update if I find out something. Thanks for bringing up this issue.

          Reply
    • Sorry — I will need to upgrade to Sierra first to find an answer to this, but haven’t had the time. Please, let us know also if you figure out something. Thanks!

      Reply
  1. I have just tried it with Sierra, everything works as described in the guide with XCode 8.1.

    However, I am not sure how can I know if my computer isn’t actually using the built-in bluetooth adapter.

    Reply
    • Thank you for the feedback Sherif — can you tell us which Bluetooth dongle brand are you using with Sierra?

      You can go to ‘System Information‘ and see which chipset Bluetooth has. I’m attaching the screenshot from my MacBook Pro, OS X El Capitan 10.11.6 — manufacturer should be the same Broadcom and I have the Chipset “20702A3” with the above mentioned dongle. Does that help?

      MacOS System Information Bluetooth Chipset 20702A3

      Reply
      • I’m running macOS Sierra and iOS 10, and my Bluetooth Chipset is exactly the same as yours (Broadcom 20702A3) and still when I try to pair those devices, it just disconnects it, and when I try again, it says on my phone “macbook pro not compatible”. Any suggestion?

        Reply
  2. 10.12.5 – Xcode 8.3.3, Additional tools 8.2 (there is no 8.3 version listed in downloads) – opened dmg and executed Bluetooth Explorer but no application chrome is ever shown (i.e. no window) just an icon in the dock that does nothing.

    Reply
  3. Hi, I have followed your instructions to the point where we get to Bluetooth Tools, I can’t find them, can you please advise in simple terms please.

    Reply
  4. I had mixed results with the TP-Link UB400 Bluetooth 4.0 dongle with Cambridge chipset.
    On an Mac Mini from mid 2011 (Mac Mini model 5,2), that MacOS 10.13.6 picked the UB400 with no issue as the main USB dongle, and the Bluetooth control panel seemed perfectly happy with that. Note that the Mac Mini 5,2 already comes with a embedded bluetooth by Broadcom 4.0

    But on another iMac, an iMac 21,5″ from mid 2011 (iMac 12,1), that MacOS 10.13.6, same dongle was seen by the USB bus, but the iMac kept using the embedded Broadcom 2,1 Bluetooth.

    I noticed in the USB tree that in the Mac Mini both USB chips are part of the same USB bus tree branch, not so on the iMac. And on the Mac Mini the Cambridge based USB dongle took an earlier position in the tree.

    Reply
  5. Thank you so much (!) that you decided to post this online. Saved my old friend 27” Late 2013 on Catalina… using TP-Link UB400 and your instructions.

    Reply

Leave a Reply to David Cancel reply